1s-12-5ech | Russol

General information

Type	Globe valves - 1s type
Subtype:	Medium parameters valves
Operating medium:	water-steam
Body material:	20

Description

Globe valves are designed for full fluid flow cut-off and equipped with shut-off device. These valves must be fully open or close during their operation. Globe valves are always single-seated.

We provide a full range of customer service including full warranty, 24/7 consultation and support, valuable insights into the ideal technical solutions in accordance with your requirements and expectations. At your desire we will be glad to supervise or execute the installation and commissioning process. Thanks to strict control over manufacturing process each equipment unit is inspected and recorded so the aftermarket support and spare parts delivery are notable for promptness and full interchangeability. To prolong the life-time of your equipment we are always ready to render on-site services from scheduled maintenance to troubleshooting, equipment inspection and emergency & repair works. All-time we keep our customers informed concerning possible improvements, up-to-date solutions and technical developments which can help to upgrade your equipment and enhance efficiency.

Technical data

Diameter, DN:	50	mm
Pressure, PN:	25	MPa
Temperature:	450	C˚
Hydraulic resistance coefficient ξ:	7
Rotational moment on the shaft:	250	N·m
Number of revolutions:	6
Operating stroke:	36	mm

Dimensions

D1:	50	mm
D2:	66	mm
L:	250	mm
H:	1229	mm
A:	85	mm
Weight (w/o actuator):	38	kg
Weight (with actuator):	79	kg

Actuator

Control type:	Э
Actuator model:	ПЭМ-Б1М У2
Actuator power:	0.55	kW
Full stroke time:	14.4	s

Drawing

This equipment can be searched by the following tags: 1s-12-5ech, Globe valves - 1s type, Medium parameters valves, 1s-12-5ech of Globe valves - 1s type, Medium parameters valves 1s-12-5ech of Globe valves - 1s type ,Medium parameters valves Globe valves - 1s type, ПЭМ-Б1М У2, DN 50, DN 50 Valve, Valve, 1s-12-5ech, На средние параметры, Клапаны запорные типа 1с, 1s-12-5ech valve.

Capacity ^?:		ths. m³
Total pressure ^?:		Pa
Temperature ^?:		С ^о
Permissible variation ^?:		%

Capacity:		t/h
Output pressure:		MPa
Output temperature:		С ^о
Permissible variation ^?:		%

Capacity:		MW
Output pressure:		MPa
Permissible variation ^?:		%

① Fan type:	FD Fan ID Fan
② Subtype:
③ Climatic modification ^?:
④ Scroll layout ^?:	° - °
⑤ Rotation direction ^?:	Right-hand Left-hand
⑥ Quantity:	pcs.
⑦ Delivery date:

① Capacity:	ths. m³/h
② Handled medium temperature:	°C
③ Total pressure:
④ Atmospheric pressure: ^?:
⑤ Required efficiency:
⑥ Capacity regulation: ^?:	Yes No

DN:		mm
Pressure:		MPa
Temperature:		^оС
Permissible variation ^?:		%

① Type: Asynchronous squirrel cage Asynchronous with phase-wound rotor Synchronous
② Climatic modification ^?:
③ Rate speed:	rpm
④ IP ^?:	IP
⑤ Supply-line voltage:	V
⑥ Frequency:	Hz

① Density	kg/Nm³
② Dustiness:	g/Nm³
③ Agressive agents content:	%
④ Sticking tendency: ^?

① Company name:*
② Contact person:*
③ Telephone:*
④ Fax:
⑤ Email:*
* - fields are to be filled.

① Boiler type:	Steam Hot-water
② Application:	Heating Hot-water supply Process needs Power generation
③ Fuel ^?:	1: 2:
④ Quantity:	шт.
⑤ Delivery date:

① Steam capacity:	t/h
② Output pressure:
③ Output temperature:	°C
④ Supply water temperature:	°C

① Capacity:
② Operating output pressure:
③ Water temperature graph:	°C

Combustion chamber:
Steam superheater	Economizer
Air heater	Coal pulverization
Mill fan	FD Dan
ID Fan	Ash catcher
Chimney	Ash and slag removal
CPCS	Phosphatizing
Water treatment	Soot blowers

① Grade:
② Calorific value:	kcal/kg
③ Lump size:	mm
④ Humidity:	%
⑤ Ash:	%
⑥ Ultimate composition:	% - Carbon (C) % - Hydrogen (H) % - Oxygen (O) % - Nitrogen (N) % - Sulfur(S)

① Calorific value: ^?:	kcal/m³
② Gas cubic meter weight:	kg/m³
③ Gas temperature:	°С
④ Ultimate composition:	% - Carbon monoxide (СО) % - Carbon dioxide (СО2) % - Hydrogen (H2) % - Oxygen (O2) % - Nitrogen (N2) % - Methane (CH4) % - Heavy hydrocarbon (СmHm) % - Hydrogen sulphide (H2S)

① Pipeline	Outer diameter: mm Wall thickness: mm
② Type of connection:	Welded neck Flanges
③ Additional requirements:

① Calorific value:	kcal/kg
② Ash:	%
③ Lump size:	mm
④ Humidity:	%

① Fuel grade:
② Calorific value:	kcal/kg
③ Flash point:	°С

① Type:
② Subtype:
② Subtype:
② Subtype:
③ Operating medium:	Steam Water
④ DN:	Input: mm Output: mm
⑤ Climatic modification ^?:
⑥ Leakage class ^?:
⑦ Body material:
⑧ Quantity:	pcs.
⑨ Date of delivery:

① Fluid temperature:	°С
② Input pressure:	MPa
③ Output pressure:	MPa
② PN:	MPa
③ Operating pressure:	MPa
④ Max. flow rate under min. pressure differential, Gмах:	t/h
⑤ Max. flow rate Gмах:	t/h
⑥ Min. pressure differential unde max. flow rate:	MPa
⑦ Max. pressure differential under min flow rate:	MPa
⑧ On-stream time under max. pressure differential:	h/year
④ Opening pressure:	MPa
⑤ Reverse-seat pressure:	MPa

① Main steam capacity:	t/h
② Desuperheated steam capacity:	t/h
③ Main steam pressure	MPa
④ Main steam temperature	°С
⑤ Desuperheated steam pressure	MPa
⑥ Desuperheated steam temperature	°С
⑦ Cooling water pressure	MPa
⑧ Cooling water temperature	°С

① Control type:	Manual Actuator
② Actuator producer:	Russian Other
③ Total opening (closing) time:	s